Installation guide

Appendix B: DigiTest Error Codes 61
appendix b
DigiTest Error Codes
DigiTest Error Codes
Code Description
Err3 Cards from different Pro Tools
systems are incorrectly mixed.
See “Card Order Guidelines for
Each Pro Tools System” on
page 58.
Err4 Cards marked with this error are
installed in the wrong order. See
“Card Order Guidelines for Each
Pro Tools System” on page 58.
Err5 Too many cards of this type are
installed in the system. Refer to
the Digidesign Web site for com-
patibility information:
www.digidesign.com/compato/
Err6 A card is installed in a reserve
slot. For example, a Digidesign
card is installed in the slot
reserved for the Expansion Chas-
sis Host Interface card. Refer to
“Card Order Guidelines for Each
Pro Tools System” on page 58, as
well as related installation guides.
Err1010 Too many MIX Core cards
installed. The maximum number
of MIX Core cards allowed is 7.
Err1011 Too many MIX Farm cards
installed. The maximum number
of MIX Farm cards allowed is 7.
Err1012 Too many total MIX cards
installed. The maximum number
of total MIX cards allowed is 7.
Err1020 Too many d24 Core cards
installed. The maximum number
of d24 Core cards allowed is 2.
Err1021 Too many MIX I/O cards installed.
The maximum number of MIX I/O
cards allowed is 2.
Err1022 Too many total d24 cards
installed. The maximum number
of total d24 cards allowed is 2.
Err1220 SCSI Accelerator card is installed
in the wrong slot. See “Card Order
Guidelines for Each Pro Tools Sys-
tem” on page 58 for correct loca-
tion of the card.
Err1221 Expansion Chassis Host Interface
card is installed in the wrong slot.
See “Card Order Guidelines for
Each Pro Tools System” on
page 58 for correct location of the
card.
Err1301 A Core card is not installed. At
least one Cord card is needed.
Err1310 A DSP Farm card is not installed.
At least one DSP Farm card is
needed.
DigiTest Error Codes
Code Description
TDM_Install.book Page 61 Saturday, January 13, 2001 9:35 PM