Installation guide

Appendix A: Determining Slot Order 57
appendix a
Determining Slot Order
In order to determine slot order for your TDM
cards, you need to first note the model of your
Power Macintosh, then find its lowest numeric
slot.
The following figures show the lowest slot for
Power Macintosh computers supported by
Pro Tools.
For systems without an Expansion Chassis,
the primary d24 or MIX Core card will al-
ways be installed in your computer’s lowest
slot. Subsequent cards will be installed as
described in “Card Order Guidelines for
Each Pro Tools System” on page 58.
For systems using an expansion chassis to
add additional cards to your system, refer to
the Pro Tools
Expanded Systems Guide.
G4 Dual Processor
G4
G3 Blue & White
TDM_Install.book Page 57 Saturday, January 13, 2001 9:35 PM