Installation guide

TDM Installation Guide52

Opening the Demo Session

Now you will open the demo session and begin

playback to hear Pro Tools in action.

To open the demo session:

1 Locate and open the demo session folder.

2 Double-click the ﬁle, “Pro Tools Sound-

Check.”

3 If this is the ﬁrst time you are launching

Pro Tools, a dialog appears prompting you to

use the Hardware dialog to conﬁgure your sys-

tem. Click OK. (See “Conﬁguring Pro Tools TDM

Cards and Audio Interfaces” on page 50.)

To play the demo session:

1 Adjust the volume control on your monitor-

ing system so that it is set relatively low. You can

adjust levels as the demo begins to play.

2 Press the Spacebar on your keyboard to begin

playback. To stop playback, press the Spacebar

again.

Welcome to Pro Tools!

If you weren’t able to play the demo session,

see the Pro Tools Reference Guide for trou-

bleshooting tips.

TDM_Install.book Page 52 Saturday, January 13, 2001 9:35 PM