Installation guide

TDM Installation Guide48
Running DigiTest
Run the DigiTest diagnostics application to
identify TDM cards and verify that they are cor-
rectly installed and working.
To run DigiTest:
1 From the Digidesign Utilities folder, double-
click the DigiTest application program. DigiTest
opens and lists the supported cards it finds in
your system in their corresponding slot loca-
tion.
If a supported card is installed and not listed,
check card seating and ribbon connection.
Close DigiTest, power down your system, and
reinstall the cards (see “Installing the Pro Tools
Cards” on page 15). After power up, begin Digi-
Test again.
2 From the SlotArrangement menu, select your
computer. The number of computer card slots
updates in the main window to reflect your
computer model.
DigiTest is included on the Pro Tools In-
staller CD and installed with Pro Tools.
DigiTest resides in the Digidesign Utilities
folder.
Before you run DigiTest, lower the volume
of all output devices. Very loud digital noise
may be emitted during the test.
DigiTest for Pro Tools 24 system running on Power
Macintosh 9600
DigiTest for Pro Tools 24 Mix system with SampleCell II
running on Power Macintosh G4
DigiTest Slot Arrangement window (Power Macintosh
G4 Dual Processor)
TDM_Install.book Page 48 Saturday, January 13, 2001 9:35 PM