Setup guide

Chapter 11: Pro Tools Mode with 003 99
Depending on the current Console or Channel
View, you can display insert, plug-in, or
pan/send settings.
In most temporary display views, faders and ro-
tary encoders can be used to change settings as
you are temporarily viewing them.
To reset the LCD display to show settings for all
views instead of track or control names:
 Hold Command/Ctrl and press Display.
To return the LCD display to its default state
(showing track or control names in all views):
 Press the flashing Display Mode switch.
To temporarily display fader level in the LCD
(Console Pan View):
1 Press the Pan switch to put 003 in Pan View.
2 Hold the Display Mode switch. The lower row
of the LCD shows fader levels for the current
bank of channels (such as Channels 1–8).
To temporarily display send level in the LCD
(Console Send View):
1 Press the Send switch to put 003 in Send View.
2 Hold the Display Mode switch. The lower row
of the LCD shows send level for the current bank
of sends (such as Send A for Channels 1–8).
To temporarily display insert or plug-in parameters
in the LCD (Console or Channel View):
1 Do one of the following:
• Make sure the Insert switch is lit in the
Console View section.
– or –
• Make sure the EQ, Dynamics, Insert, or
switch is lit in the Channel View section
2 Press Channel Select for the an insert or
plug-in that you want to display.
3 Hold the Display Mode switch. The lower row
of the LCD shows the insert or plug-in settings.
To temporarily display the channel pan setting and
send levels in the LCD (Channel View):
1 Press the Pan/Send switch to put 003 in Chan-
nel View.
2 Press Channel Select for the channel with the
pan and sends you want to display.
3 Hold the Display Mode switch. The lower row
of the LCD shows the channel pan setting in the
first fader strip and send levels for the cur-
rently-selected channel in fader strips 3–8.
See “Working in Console View” on page 92
and “Working in Channel View” on
page 95 for information on the different
Console and Channel Views.
Fader levels can be adjusted with faders
while the Display mode switch is pressed.
Send levels can be adjusted with rotary
encoders (or with faders in Flip mode)
while the Display mode switch is pressed.
Parameters with ranges can be adjusted
with rotary encoders (or with faders in Flip
mode) while the Display mode switch is
pressed. Controls such as On/Off cannot be
changed when the Display mode switch is
pressed.
Pan settings and fader levels can be
adjusted with rotary encoder while the Dis-
play mode switch is pressed.