Setup Guide

: 143
appendix a
Utility Mode (003 Only)
003 is in this mode when the Utility switch is
enabled (flashing). In Utility mode, you can run
pre-programmed diagnostic tests of the 003
unit. The Utility switch is unavailable in
Pro Tools mode.
Utility functions include the following:
• Software and firmware version display
• Tests for the LCD display, LEDs, switches,
rotary encoders, faders, MIDI, and audio.
• Return MIDI Maps to factory default set-
tings. See
Chapter 12, “Using MIDI Mode
with 003.”
Accessing Utility Mode
To enter Utility mode:
1 If Pro Tools is running, choose Pro Tools > Quit
(Mac) or File > Exit (Windows).
2 Press the Utility switch.
The Utility switch flashes when it is enabled.
The LCD shows the top level Utility functions
across the lower row: Version and Test. The cor-
responding Channel View switches flash for
each available Utility option.
Navigating Utility Mode
When running a Utility mode test, you can re-
turn to the previous Utility page or exit the test
at anytime.
To return to the previous Utility page:
 Press the flashing Display Mode switch.
To exit a test:
 Press the flashing ESC switch or Display Mode
switch.
Utility mode is not available in Pro Tools
mode. Pro Tools must be closed to enable
Utility mode.