Setup Guide

003 Family Setup Guide110
To scroll the display of tracks on 003 backwards:
 Hold the Nudge switch and rotate the inner
Jog wheel counter-clockwise to scroll tracks to
previous faders.
Banking Master Faders
To bank all Master Fader tracks in the current
session to the right-hand side of the control
surface:
 Press the Mstr Fader switch so that its LED is
flashing.
To return the control surface to the previous view:
 Press the Mstr Fader switch so that its LED is
unlit.
Muting Fader Movement
Because 003 faders are motorized, they move to
follow automation when playing back and re-
cording (when the track is set to an automation
read or write mode, and not Off). During critical
listening passes, the sound of the fader motors
and their automated movements may be dis-
tracting. You can temporarily shut off (or mute)
motorized fader movement using the Fader
Mute switch.
To mute fader movement:
 Press the Fader Mute switch so that its LED is
flashing.
To unmute fader movement:
 Press the Fader Mute switch so that its LED is
unlit.
Working with Automation
The Automation mode can be set from 003 for a
single track, all selected tracks, or all tracks in
the session. You can also suspend automation
globally.
To set the Automation Mode for a single track:
 Hold an Automation Mode switch and press
the Channel Select switch on a track.
To set the Automation Mode for all tracks
 Hold the Option/Alt All and press an Automa-
tion Mode switch.
To set the Automation Mode for all selected tracks
 Hold the Option/Alt (All)+Shift (Add) and
press an Automation Mode switch.
To suspend automation for all tracks:
 Press the Suspend switch.
To return all tracks to their previous Automa-
tion modes, press the Suspend switch again.