Operation Manual

70
Parameters Description
Enable DMZ Enable/disable DMZ
Note: If there is a conflict between the
Virtual Server and the DMZ setting, then
Virtual Server function will have priority
over the DMZ function.
DMZ Host Input the IP address of a particular host in
your LAN that will receive all the packets
originally going to the WAN port/Public IP
address above
Note: You need to give your LAN PC
clients a fixed/static IP address for DMZ to
work properly.
General L4 protocol forward Check this to enable the general layer 4
protocol forwarding function.
ICMP forward Check this to allow the ICMP packets
forward to the DMZ host.