Operation Manual

65
Direction/IP Ingress means packets from LAN to Gateway and
Egress means packets from Gateway to WAN. Pay
special attention to the “eg ress, source ip/port”
direction group. The source ip address of an lan-to-
w an packe t w ill be alre ady ch ange d to gatew ay’s
public ip address. That means if you created a
system-wise egress rule, please specifying the
Gateway WAN ip address as the source IP.
Type Specify the traffic type here. You can pick TCP for
TCP traffic, UDP for UDP traffic, or IP for all kind of
IP traffic.
Port Specify the TCP/UDP port number for filtered traffic.
Day/Time You can select a range of day and time that the
specified PCs will not able to access the Internet on
these time period.
Enable You can Enable/Disable some policies by check
their enable checkbox.
You can now configure other advance sections or start using the router
(with the advance settings in place)