Operation Manual

62
2.6.5 Static Routing
This router provides Static Routing function when NAT is disabled. With
Static Routing, the router can forward packets according to your routing
rules. The IP sharing function will not work anymore in Static Routing mode.
Note: The DMZ function of firewall will not work if static routing is enabled.
Parameter Description
Route The network address of destination LAN.
Route Mask The subnet mask of destination LAN.
Next Hop IP The next stop gateway of the path toward the
destination LAN. This is the IP of the neighbor router
that this router should communicate with on the path to
the destination LAN.
Interface The interface that go to the next hop (router).