Operation Manual

59
Trigger Start/Finish Range This is the out-going (Outbound) range of
port numbers for this particular application
Enable Enable the specified Special Application
function.
Click <Apply> at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the router (with the advance settings in place)
Example: Special Applications
If you need to run applications that require multiple connections, specify
the port (outbound) normally associated with that application in the "Trigger
Port" field. Then select the protocol type (TCP or UDP) and enter the
public ports associated with the trigger port to open them up for inbound
traffic.
Example:
Name
Incoming
Type
Inco
ming
Port
Ran
ge
Trigger
Type
Trigger
Start Port
Trigger Finish Port
Enable
MSN
Game
Zone
TCP
2300-2400,
47624
UDP
28800
28800
MSN
Game
Zone
Battle.net
UDP
6112
UDP
6112
6112
Battle.net
In the e xam ple above , w hen a u ser trigg er’s port 28 800 (o utbo und) for
MSN Game Zone then the router will allow incoming packets for ports
2300-2400 and 47624 to be directed to that user. Note: Only one LAN
client can use a particular special application at a time.
2.6.3 ALG Settings
You can select applications th at nee d “A p plication Laye r G ate w ay” to
support.