Operation Manual

58
Parameters Description
Name The description of this setting.
Incoming Type Select the Inbound port protocol type: “TCP”,
“UDP” or bo th
Incoming Port Range Enter the In-coming (Inbound) port or port
range for this type of application (e.g. 2300-
2400, 47624)
Note: Individual port numbers are separated
by a comma (e.g. 47624, 5775, 6541 etc.).
To input a port rang e use a “d ash” to
separate the two port number range (e.g.
2300-2400)
Trigger Type Select whether the outbound port protocol is
“TCP”, “UDP” or bo th.