Operation Manual

52
Parameters Description
Queue ID The Queue (Group) ID groups all the
connections with the same Queue ID
into one rule and these connections
share the same bandwidth in this rule.
Src/Dst If you want to monitor the source IP of
the packets, please select src IP.
Otherwise, please select dst IP.
IP Address Specify the IP Address that you want to
limit the transmit/receive rate.
IP Mask If you want to limit a subnet, you can
specify the subnet mask here.
Protocol Specify the protocol you want to monitor,
it can be TCP / UDP / or IP only.
Start / End Port Specify the port ranges that you want to
monitor. To classify all TCP or UDP
packets within same IP address / mask
(regardless of port number) as same
rate policy, set 0 to both Start Port and
End Port.
Bandwidth allocation policy Guaranteed or Spare.