Operation Manual

Remove MAC address from list If you want to remove some MAC

address from the Access Control List,

select the MAC addresses you want to

remove in the list and then click "Delete

Selected". If you want remove all MAC

addresses from the table, just click

"Delete All" button. Click "Reset" will

clear your current selections.

Click <Apply> at the bottom of the screen to save the above

configurations. You can now configure other advance sections or start

using the router (with the advance settings in place)

2.5 QoS

This router supports various types of QoS – Port-based QoS, Rate Policing

QoS, and Guaranteed/Spare Class QoS.

For Port based QoS, user can specify the High/Low queue priority for each

Ethernet port and can apply total rate limit to any port from 128Kbps to

32Mbps or at Full-rate(100Mbps). Flow control can also be

enabled/disabled on per-port basis.

For Application based QoS, user can specify a destination port number

and associate it with a egress priority(High or Low). For example, in Fig 35,

if user config port 7297 with high priority, then user would experience

better service quality for such flows.