Operation Manual

Bridge-W D S m od e”. Y ou ha ve to ente r th e M A C

addresses of other access points that join the

bridging work.

Set Security C lick the “S et S ecurity” b utton , th en a “W D S

S ecurity S ettings” w ill po p u p. Y ou can set the

security parameters used to bridge access points

together here when your AP is in AP Bridge modes.

You can refer to se ction 4.3 “S e curity S e ttings” for

how to set the parameters.

Click <Apply> at the bottom of the screen to save the above

configurations. You can now configure other advance sections or start

using the router (with the advance settings in place)

2.4.2 Advanced Settings

You can set advanced wireless LAN parameters of this router. The

parameters include Authentication Type, Fragment Threshold, RTS

Threshold, Beacon Interval, preamble Type. You should not change these

parameters unless you know what effect the changes will have on this

router.