Operation Manual

30
2.1.3 Remote Management
The remote management function allows you to designate a host range in
the Internet the ability to configure the Broadband router from a remote site.
Enter the designated host IP Addresses in the IP Address field.
Parameters Description
IP Address Please specify the IP range to the Remote
Management IP fields. All the Internet IPs that
inside this range can manage this router from WAN
side.
Port To avoid conflict of virtual server at port 80, user
can specify a different port in Remote Management
Port for WAN side access.
Ping from WAN side Ping from WAN side is turned on by default and
could be turned off if the Enable checkbox is
unchecked.
Click <Apply> at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the router (with the advance settings in place)