Operation Manual

24
Login ID Enter the User Name provided by your ISP for the
PPTP connection. Sometimes called a Connection
ID
Password Enter the Password provided by your ISP for the
PPTP connection
MTU This is optional. You can specify the maximum size
of your transmission packet to the Internet. Leave it
as it is if you to not wish to set a maximum packet
size.
Silent Timeout If specified a non-zero value, gateway disconnects
this session after specified idle time.
Dial On Demand If ch ecked , g atew ay w on’t dial th is se ssion until
received a packet that requested Internet access. If
unchecked, gateway dials this session immediately
after system powered up.
Auto Reconnect If checked, gateway redials this session if session
previously terminated by ISP.
Auth Type Select PAP or CHAP for the authentication type
requested by your ISP.
Click <OK> when you have finished the configuration above.
Congratulations! You have completed the configuration for the L2TP
connection. You can start using the router now, if you wish to use some of
the advance features supported by this router see chapter 2, 3, 4.