Operation Manual

20
AC Name This is optional. Enter the AC Name should your ISP
requires it, otherwise leave it blank.
MTU This is optional. You can specify the maximum size of
your transmission packet to the Internet. Leave it as it
is if you to not wish to set a maximum packet size.
Dial On Demand If checked, gate w a y w on’t dial this session until
received a packet that requested Internet access. If
unchecked, gateway dials this session immediately
after system powered up.
Silent Timeout If specified a non-zero value, gateway disconnects
this session after specified idle time.
Auto Reconnect If checked, gateway redials this session if session
previously terminated by ISP.
Auth Type Select PAP or CHAP for the authentication type
requested by your ISP.
Click <OK> when you have finished the configuration above.
Congratulations! You have completed the configuration for the PPPoE
connection. You can start using the router now, if you wish to use some of
the advance features supported by this router see chapter 2, 3, 4.
1.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the
Internet. Your ISP should provide all the information required in this section.