User`s manual

MICHELANGELO SHDSL VPN Firewall Bridge/Router
Chapter 4:Configuration
34
PPPoA Routed Connections
Description: User-definable name for the connection.
VPI/VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through a
single IP account, sharing a single IP address. If users on your LAN have public IP addresses and can access
the Internet directly, the NAT function can be disabled.
Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric characters (case
sensitive). This will usually be in the format of “username@ispname” instead of simply “username”.
Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric characters (case
sensitive).
IP Address: Specify an IP address allowed to logon and access the router’s web server..
Note: IP 0.0.0.0 indicates all users who are connected to this router are allowed to logon the device and modify data.
Authentication Protocol Type: Default is Chap (Auto). Your ISP will advise you whether to use Chap or Pap.
Connection:
§ Always on: If you want the router to establish a PPPoA session when starting up and to automatically
re-establish the PPPoA session when disconnected by the ISP.
§ Connect on Demand: If you want to establish a PPPoA session only when there is a packet
requesting access to the Internet (i.e. when a program on your computer attempts to access the Internet).
Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on the line for a
predetermined period of time.
§ Detail: You can define the destination port and packet type (TCP/UDP) without checking by timer. It
allows you to set which outgoing traffic will not trigger and reset the idle timer.
RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.