User`s manual

MICHELANGELO SHDSL VPN Firewall Bridge/Router
Chapter 4: Configuration
26
Configuration
When you click this item, you get following sub-items to configure your router.
LAN, WAN, System, Firewall, VPN, QoS, Virtual Server, Time Schedule and Advanced
These functions are described below in the following sections.
LAN (Local Area Network)
Here are the items within LAN section: Bridge Interface, Ethernet, IP Alias, Ethernet Client Filter, Port
Settings and DHCP Server.
Bridge Interface
You can setup member ports for each VLAN group under Bridge Interface section. From the example, two
VLAN groups need to be created.
Ethernet: P1 (Port 1)
Ethernet1: P2, P3 and P4 (Port 2, 3, 4). Uncheck P2, P3, P4 from Ethernet VLAN port first.
Note: You should setup each VLAN group with caution. Each Bridge Interface is arranged in this order.
Bridge Interface
VLAN Port (Always starts with)
Ethernet
P1 / P2 / P3 / P4
Ethernet1
P2 / P3 / P4
Ethernet2
P3 / P4
Ethernet3
P4
Management Interface: To specify which VLAN group has possibility to do device management, like doing
web management.
Note: NAT/NAPT can be applied to management interface only.