manual

PCI USB 2.0 Installation
2.2
4. Shut down your computer and follow with HARDWARE INSTALLATION.
2.1.2. HARDWARE INSTALLATION
1. Before connecting Digicom PCI USB 2.0, run the software
installation. (see SOFTWARE INSTALLATION paragraph).
2. After having turned off the computer and unplugged the power cord,
remove the computer’s cover. Select an available PCI slot and push
firmly, but gently, until Digicom PCI USB 2.0 is well seated. Put
back the computer’s cover, reconnect the power cord and power on
the computer.
2.1.3. DRIVER INSTALLATION
1. Windows® will detect a new hardware and it will install the driver automatically. You will see the Found New
Hardware windows.
Some Operating System will show Found New Hardware Wizard, in this case, select Install the software
automatically or Search for a driver and click Next.
2. The Operating System will install the chip-set drivers automatically.
Windows®XP and Windows®2000 will show the Hardware Installation window, about Windows® Logo: click
Continue Anyway / Yes to continue the installation.