User`s manual

PcCard USB 2.0 Installation
2.2
4. Windows® will restart, then follow with HARDWARE INSTALLATION.
2.1.2. HARDWARE INSTALLATION
1. Before connecting Digicom PcCard USB 2.0, run the software
installation. (see SOFTWARE INSTALLATION paragraph).
2. Search for an availble Card Bus 32bit Type II slot on your laptop. If
necessary, refer to the PC User’s Manual to identify the Card Bus
32bit Type II slot.
Insert the card in the Card Bus 32bit Type II slot of your computer in
the correct way up, then follow with DRIVER INSTALLATION.
2.1.3. DRIVER INSTALLATION
1. Windows® will detect a new hardware and it will install the driver automatically. You will see the Found New
Hardware windows.
Some Operating System will show Found New Hardware Wizard, in this case, select Install the software
automatically or Search for a driver and click Next.
2. The Operating System will install the chip-set drivers automatically.
Windows®XP and Windows®2000 will show the Hardware Installation window, about Windows® Logo: click
Continue Anyway / Yes to continue the installation.