User`s guide

Green
EDGE or GPRS connection is established
2G/2.5G LED
Green in flash
Data packet transferred via 2G/2.5G
Green
UMTS/HSDPA/HSUPA connection is
established
3G/3.5G LED
Green in flash
Data packet transferred via 3G/3.5G
Green
SMS storage is full
SMS LED
Green in flash
There is any unread SMS in the storage
Green
RJ45 cable is plugged
WAN LED
Green in flash
Data access
Green
RJ45 cable is plugged
LAN LED
Green in flash
Data access
Green
WLAN is on
Green in flash
Data access
WiFi LED
Green in fast flash
Device is in WPS PBC mode
How to operate
Step 1. Attach the antenna.
1.1. Remove the antenna from its plastic
wrapper.
1.2. Screw the antenna in a clockwise
direction to the back panel of the unit.
1.3. Once secured, position the antenna
upward at its connecting joint. This will
ensure optimal reception.
1.4. And rip the “USIM/SIM & PWR” sign
label from “Pull” tag.
1.Turn off the Power Switch
first.
2.DO NOT connect WiFi HSPA
IAD to power before
performing the installation
steps below.
Step 2. Insert SIM/USIM to IAD.
NOTE:
2.1. The WiFi HSPA IAD builds in a
HSUPA 3G modem card. Please refer to
your service provider for detailed feature
information.
2.2. A 3G SIM/USIM Card with services is
MUST, the Data service and the Voice
service.