User`s guide

2.3
3G Gateway Series Hardware Installation
2.1. BATTERY BACKUP
The battery backup is placed into the product. The connection of the battery is at the installer or at the end user’s care.
Battery backup features: Li-ion 7,4V 1700mAh
To connect the battery backup:
• Poweroffthedeviceandremovetheplasticcoverbyturningthescrews
• Inserttheconnectorintothecardasshowninpicture
• Closetheupperplasticcoverandsecureitbyusingthetwoscrews.
2.1.1. Replacement of battery
The battery is sticked on the device.
To replace it, disconnect the connector from the card and gently remove the battery.
Note: You are advised to use battery supplied by Digicom only.