User`s guide

Digi International, Inc. User’s Guide
- 34 -
configuration files then download the firmware from step 2.
5. After finishing this procedure, the Digi Wi-Point 3G will reboot automatically and
the POWER LEDs will blink amber.
After completion the Digi Wi-Point 3G will have the factory default configuration.
Please refer to chapter 5 for the factory default values.
3.4 Frequently Asked Questions
What is the maximum number of IP addresses that the Digi Wi-Point 3G will
support?
The Digi Wi-Point 3G will support up to 253 IP addresses.
Is IPSec Pass-Through mode supported by Digi Wi-Point 3G?
Yes, it is a built-in feature that the Digi Wi-Point 3G automatically enables.
Does Digi Wi-Point 3G support IPX or AppleTalk?
No. TCP/IP is the only protocol supported.
What is Network Address Translation and what is it used for?
Network Address Translation (NAT) translates multiple IP addresses on the private
network to one public Internet address. This adds a level of security since the address of a
PC connected to the private network is never transmitted on the Internet
Does the Digi Wi-Point 3G support any operating system other than Windows 98,
Windows Millennium, Windows 2000, or Windows XP?
The Digi Wi-Point 3G supports any 802.11 b/g client.