User`s guide

Digi International, Inc. User’s Guide
- 23 -
Remote Syslog Server checkbox and assign the IP address of remote syslog
server in the bottom box.
2.5.1.5 Security
Configure security settings for the Digi Wi-Point 3G including username, password
Anti-Attack, and filter settings.
MAC Filter Settings (See configuration settings for the in section 2.5.1.1)
IP Filter Settings: This feature allows you to filter the IP addresses that have access to
the Digi Wi-Point 3G.
IP Forwarding: This feature allows you to forward incoming traffic on certain ports to
access services behind the NAT. This feature can setup a web server, mail server, etc. to
be accessed from the Internet.
The IP Forwarding table in the Digi Wi-Point 3G consists of many port forwarding items.
o Enable Checkbox：You can enable or disable an IP forwarding item by checking
or clearing this box.
o Apply: Click Apply to validate the change immediately. No reboot is needed here.
o Add: Click Add. An IP forwarding item will appear in the list above.