User`s guide

Digi International, Inc. User’s Guide
- 18 -
Mode 1: no security, no authentication
• Network Authentication: OPEN
• Data Encryption: Disabled
Mode 2: enable security, no authentication
• Network Authentication: OPEN
• Data Encryption: WEP
Mode 3: no security, enable authentication
• Network Authentication: Shared
• Data Encryption: Disabled
WPA-PSK:
A Network SSID is required before a password can be entered for WPA-PSK
authentication.
Note:
Enter the Network name (SSID) on the Wi-Fi LAN Settings tab.
Access Control Mode: Allowing or denying some special stations connection in the Wi-Fi
network can increase the security of the wireless network. The following components can
be configured to set the station connection control and assure wireless network security.
The Digi Wi-Point 3G supports 3 types of access control modes:
•
Disabled: Indicates no access control function, allows all of the stations connect to
the Digi Wi-Point 3G.
•
Allow: Indicates the stations which have the MAC addresses listed in the table are
allowed to access the Digi Wi-Point 3G.
•
Deny: Indicate the stations which have the MAC addresses listed in the table are
denied access the Digi Wi-Point 3G.