Owner's manual

DiGiCo Optocore V221
A1-15
A3.2.4 Single Loop Console on Loop 2........................................
SD8, SD9, SD10 and SD11 consoles are only able to have connections fitted one loop and the internal connections within the
console will be to loop 1.
In the Options>Console menu, the Enable Optocore option allows the console to either be a loop 1 console or loop 2 console
(shown below) without having to alter the internal connections.
Single loop consoles operate independently on each loop. For example, a system can exist of a dual loop SD7 (IDs 1+2), an SD8
(ID3) on loop 1 and an SD10 (also ID3) on loop 2.
SD5s & SD7s that only have a single loop fitted can also set to operate on either Loop 1 or Loop 2.