Brochure

E&OE
With DiGiCo's rst dive into the world of AV install, the 4REA4
introduced some new stage boxes to the DiGiCo rack family,
along with a new audio protocol.
The A168 is a 96kHz oor or rack mountable rack (rack ears
available) with 16 analogue inputs and 8 analogue outputs.
Each has two RJ45 (EtherCON) connections which can be run
in Cascade or Redundant mode, meaning you can connect
one A168 to your S-Series console with redundant cabling or
daisy-chain the racks together to connect up to four A168s per
DMI-A3232.
The A168 uses DiGiCo's A3232 protocol to send 32 input
channels and 32 output channels over a single CAT5e/CAT6
cable.
STAGE 48
194.3
406.5
361.5
165.0
116.0108.0
183.0
154.0
391.4
421.4
REMOVABLE BUMPERS
USE TORX T20
The STAGE 48 system
inludes an S-Series console
(either an S21 or an S31), a
DMI-A3232 and 3 A168s. Perfect
for smaller venues, the STAGE 48
oers versatility and scalability to help
you fully equip your venue.
The
A168 is
also available in a
Dante compatible version: the
A168D. It works in exactly the same way
as the standard A168 except it can operate at both
48kHz and 96kHz and uses Dante instead of the A3232 protocol.
With the typical Primary and Secondary ports found on most Dante devices,
the A168D is a familiar interface that makes it incredibly easy to set up. The A168D is
compatible with the DMI-DANTE64@96 (not the DMI-DANTE) meaning it can benet from the built
in SRC to run at a dierent Sample Rate to the rest of your Dane network.