Brochure

DMI-MADI-B
This card can be used to connect a
Standard MADI stream (64 channels in
and out) at 48KHz or 96KHz or an SD-
Range DiGiCo Rack with the appropriate
connector (D-Rack, D2-Rack, SD-Rack,
SD-MiNiRack)
DMI-DANTE64@96
This card provides 64 input and 64
output channels at both 48kHz and
96kHz. It is provided with Primary and
Secondary (backup) Gigabit Ethernet
ports for connection to the Dante
network.
DMI-HYDRA 2
This card will provide 56 Input and
56 output channels at 48kHz with
Primary and Secondary (backup) optical
connections.
DMI-AVIOM
This card provides 16 output channels at
48kHz (with SRC) and Supports Aviom's
proprietry A-Net Pro16 protocol. It has
1 CAT5E connection and faceplate DIP
switched for Stereo output selection.
DMI-WAVES
This card will provide 64 input and 64
output channels at 48kHz or 96kHz to
the SoundGrid™ Network with 2 CAT5E
connections.
DMI-MADI-C
This card can be used to connect a
Standard MADI stream (64 channels in
and out) at 48KHz or 96KHz or an SD-
Range DiGiCo Rack with the appropriate
connector (D-Rack, D2-Rack, SD-Rack,
SD-MiNiRack)
DMI-ADC
This card provides 16 analogue inputs
on 2 x 25 way “D” connectors. The ADC
card is a line card only. There is no
microphone amplier or phantom power
available. S-Series has no gain control
function for these inputs (only digital
trim). Maximum input level +22dBu
DMI-DAC
This card provides 16 analogue outputs
on 2 x 25 way “D” connectors
DAC card is line level only. Maximum
output level +22dBu (Digital Full Scale)
DMI-AES
This card provides 16 Inputs (8 pairs)
and 16 outputs (8 pairs) on 2 x 25
way “D” connectors. All AES inputs are
provided with sample rate conversion
(SRC) by default. All AES outputs are
synchronised to the mixer system clock.
DMI-MIC
This card adds an extra eight mic inputs,
connected via a 25-way D-sub, using the
same great pre-amps already found in
the console. This allows for up to 40 mic
inputs directly on the console surface.
E&OE
DMI
Cards
The S-Series comes complete with dual DMI (DiGiCo Multichannel Interface) option card slots,
perfect for expandability, as it can interface with industry formats be it Analogue expansion,
MADI, Dante, Waves, or Calrec’s Hydra 2 Network. All bases are covered.
DMI-ME
This card oers a 40 output interface to
Allen & Heath ME-1 or ME-500 Personal
Mixers. Multiple personal Mixers can be
connected to the DMI ME via the ME-U
Hub.
DMI-A3232
This card allows S-Series Consoles to
connect to the A168 STAGE Stage Rack.
Each Ethercon port supports up to 32
I/O, for a total channel count of 64 I/O.