Brochure

Using the Waves DMI card, you can connect to an external server/computer to uncover a plethora of Waves and other SoundGrid Plugins via Multirack and SuperRack.
In a complete house-and-monitor DiGiCo system, Gain Tracking™, a world rst for DiGiCo, allows the console operator to change any input gain without aecting the sound balance on
either console - Gain Tracking™ is selectable on each channel independently on each console.
SSL-G Channel CLA-2AC4 Multiband
Compressor
Renaissance EqualizerWaves MultiRackVocal Rider
Plugin Bundles
Bundles and existing Waves plugins available online at
www.waveslive.com or from Waves dealer/distributor
Waves SoundGrid
Gain Tracking™
D2 Rack
2 MADI Ports, available either as BNC or CAT5E connections
DMI-MADI-B
DMI-MADI-B
Sharing a stage rack between two consoles has a number of benets but there is one potential issue
in that any mic preamp adjustments made from one console could change the mix on the other. This
is where DiGiCo's Gain Tracking™ technology comes into its own.
Gain Tracking™ uses a console's digital trim to automatically compensate for any mic preamp gain
changes made by the other console.
In the example above, the Monitor desk has Full Control of the D2-Rack (ie control of the mic preamp
gains and access to all the rack outputs) whilst the FOH desk receives a digital split of the inputs only.
Once the mic preamp gains have been set by the Monitor engineer, the FOH engineer then simply
switches on Gain Tracking™ on all channels where there are shared Inputs.
In the example to the left, the monitor engineer has increased the mic preamp gain on the KICK
channel by 8dB – see how the Gain Tracking™ function on the FOH desk has compensated for this
increase in level by automatically decreasing the digital trim by 8dB.
Gain Tracking™
Is switchable on a channel by channel basis and is shown by a green icon on the channel strip
Analogue Gain Control
When pushed becomes a digital trim
Front of House Console
DMI Card required - either BNC or CAT5E connections
Monitor Console
DMI Card required - either BNC or CAT5E connections
FOH
Monitors