User manual

4REA4 Controller Software User Guide
87
V1.30
15.11 DMI DAC
16 Line level only analogue outputs on 2 x 25 way D-Sub connectors
15.12 DMI Aviom
16 Output channels at 48KHz (with SRC) supporting the Aviom A-Net Pro16 protocol
15.13 DMI Cards - Updating Firmware and FPGA Codes (V1.20+)
DMI Cards require both Firmware and FPGA Code.
Connect Controller to a 4REA4 containing one or more DMI cards. In the Main window select Engine –
Audio – I/O Settings where you will see four tabs labelled DMI Port 1 – 4, corresponding to the four DMI
slots in the 4REA4.