User manual

4REA4 Controller Software User Guide
83
V1.30
15.2 A164 Wall LCD
Redundancy - A3232 devices can be run in redundant mode
Display Settings – The Brightness and Contrast of the displays of each A164 Wall LCD can be
controlled by adjusting the controls relative to the correct Port and Device.
Note that this menu can also be found under the AStar tab for devices connected via an AStar.
15.3 DMI AES
Input SRC Display – Enable the SRC Bypass option in Routing view by clicking on the relevant
socket to disable input sample rate conversion on a socket pair basis.
Note that DMI AES Outputs do not have AES Converters and are synced to the system clock
1
2
1
1
1
2