User manual

4REA4 Controller Software User Guide

V1.30

• Peak Manual

• RMS Manual

• Auto Punch

• Auto Opto

• Slow AutoF

• Fast AutoF

Knee - Hard or Soft (easy knee model).

Link and Relative modes:

There are three operating modes with two buttons at the top right of the screen:

• Normal - Link and Rel buttons turned off. Independent control of each band.

• Link - All band parameters linked for quick setup.

• Relative - All band parameters linked for changes relative to settings made before the Rel button

was turned on.

Per band controls:

Ratio - 1:1 (no compression) to 20:1 (maximum compression)

Gain - -6dB to +18dB

Threshold (-50dBu to 18dBu) - Sets the level at which the sidechain gain reduction occurs for that band. A

threshold dependent ‘zoom’ meter is displayed.

In/Out - Individual band bypass. The curve and controls grey out for the band.

PFL - Momentary listen to the band solo’d to PAFL. Silences the other bands.

Sidechain Meter - Shows sidechain signal level and threshold point.

Bypass - Switches the whole compressor in or out. The curve and all band controls grey out when the

compressor is bypassed.

Master Trim and Meter - Lets you adjust the output +/-12dB to compensate for the effect of the EQ on

overall level. The meter displays the stereo output signal.