User manual

4REA4 Controller Software User Guide
70
V1.30
11.2 Memory / Preset Manager
Use this page to edit and transfer presets. Presets include Channel Processing, Mix Processing, EQ, GEQ,
Gate, Compressor, FX parameters.
4REA4 Presets – Lists presets stored in the current session. click a preset to select it. You can
Rename and Delete existing presets. click Copy to USB to copy the preset to the USB drive.
USB Libraries – Lists presets stored in the USB drive. The files are stored in the USB DiGiCo-
4REA4/Presets folder. Click a preset to select it. Click Copy to 4REA4 to copy the preset to the 4REA4
memory.
 4REA4 presets are stored within a session file. If you want to use one or more presets in a different
session, save them first to USB, recall the session, and transfer the presets back to the 4REA4.
11.3 Utility / History
This page keeps a timed register of events such as system boot up or shut down, when snapshots are
recalled, and any error recognised by the system.
If you suspect a problem with the 4REA4 system you can Copy the logs to USB Key and send them
to [e-mail] for diagnostic purposes.
 Any time an error is logged a warning message will appear in the Home screen and a red triangle is
displayed in the top right corner of the screen. Click the triangle to navigate to the Home screen and
investigate the error.
⚙ Click Setup and click anywhere in this screen to access an option to Show detailed Event Logs.
1
2
1
1
2
1