User manual

4REA4 Controller Software User Guide

V1.30

10.3 Control / Macros

4REA4 Controller provides up to 26 assignable keys on the right of the application.

Open the Function drop-down menu and select the function to assign. Set the Channel Type and

Channel Number to select the required channel (only applies to certain functions). Turn on Invert LED if

you want the macro LED to be lit when the function is off. Press Apply to confirm the changes.

 Macro assignments are stored within snapshots. To prevent macro assignments to be overwritten on

snapshot recall, you can make one, a selection or all Safe using the Snapshots / Global Safes screen.

Available Macro functions are as follows:

• Unused

• Mute – Mute control for any input channel, bus or CG

• Sel – Quick access to processing for a channel

• Mix – Quick access to a specific Mix

• Solo – Quick access to a selected Solo

• Solo Clear – Turns off all currently active Solo keys

• Sel Mix Solo Snapshot – Combination on single key, for example to recall a specific per-Mix strip layout

when mixing monitors

• CG Spill Active – Turns CG Spill mode on/off

• Snapshot Controls – Quick access to snapshot controls (Fire, Store etc.)

• Tap Tempo - Assign to any of the 16 FX L or R tap

• Custom MIDI - Transmit a custom MIDI message string

• Talkback Assign - Talkback to different outputs

• Mute Group – Mutes/unmutes the specified Mute Group

• Level Up – Tap to increase level for faders

• Level Down – Tap to decrease level for faders

• Send Level Up – Tap to increase level for Aux sends

• Send Level Down – Tap to decrease level for Aux sends

• Fader On/Off – Intended for triggering GPO messages

• Fader Start - Intended for triggering GPO messages

• Track Playback – Press to start/pause hold to stop ready to start from the beginning.

Click one of the Macro buttons on the right of the screen to select it. Drag up / down to scroll.