User manual

4REA4 Controller Software User Guide
51
V1.30
Input Assign
The Input Assign window is used to specify the number of AMMs and the members of each AMM.
Inputs – Drag and drop inputs from this area into the desired AMM. All 128 inputs can be accessed,
in blocks of 32, via the tabs above the input strips. Turn on Block Select and touch the first and last item
you wish to assign to drag a range of channels into the lower window.
AMM(s) – Here you can view the members of each active AMM. To remove an input from an AMM,
drag and drop the item to the upper pane. A Clear button is provided to quickly remove all inputs from an
AMM.
Number of AMMs – Choose between 1, 2 and 4 AMM groups:
1 AMM = Maximum 64 members
2 AMM = Maximum 32 members per AMM
4 AMM = Maximum 16 members per AMM
Settings in the Setup screen are applied to all active AMM zones.
AMM Setup
Side Chain Filter - Set High Pass and Low Pass filters to cut off frequencies below and above the normal
speech range that may cause false triggering of the mics.
1
2
3
1
2
3