User manual

4REA4 Controller Software User Guide

V1.30

9.5 Config / User Profiles

Up to 10 User Profiles including an Administrator can be set to restrict operator access and protect selected

functions.

Users – The Admin user has access to all functions and can set permissions and allocate passwords

if required for the other users. The password, if one is set, is required when the User logs in or changes

User. Icons in the list indicate if a password is set and if the User is active.

Click a User to edit its profile. Click Active to enable this User in the Home / Switch User screen.

Settings – Click the User Name box to enter a name up to 16 characters. Click the Password box to

set or change a password up to 16 characters. Click the Comment box to enter an additional note.

Click the User Snapshot drop-down to select a snapshot to recall automatically when the User logs in. This

will overwrite current settings. A User Snapshot can ensure that the mixer is restored to a known starting

point for the User.

 The User snapshot only recalls when the User is changed. It does not recall when the same User logs in

or the system is powered up without changing User.

Press Set Permissions to open the Permissions window (see below).

 User Profiles are stored in the 4REA4 engine. They are not stored in sessions.

User permissions – Each User can have their own set of Permissions applied. Use the tabs across the top

of the window to view and set different groups of permissions. Select an item in the list and toggle the

Enabled/Disabled button as required. The window on the right provides a description of the functions

included in the currently selected item. Use the Enable All / Disable All buttons to quickly toggle all items in

the currently open tab. Click Apply to accept the changes.

 NOTE: These User Profiles and Permissions also apply to the A-PAD 4REA4 iPad App.

There is also a Quick Setup option to create a standard set of permissions (V1.10+). Press the Quick Setup

button, select an Area and then select either Enable All, Disable All or Area User.