User manual

4REA4 Controller Software User Guide
42
V1.30
8.8 Area Safes
The snapshot list is divided into four sections, each section is associated with a single area and has a total
of 200 snapshots. Snapshots 1 – 200 are associated with Area 1, snapshots 201 – 400 with Area 2,
snapshots 401 – 600 with Area 3 and snapshots 601 – 800 with Area 4.
An Area Safe prevents certain channels or parameters being overwritten by any snapshot recall which is not
associated with the selected area. This allows an engineer to quickly safe parameters for all snapshots in
the current areas section.
Use the tabs on the left to view the different parameter groups. Scroll to zoom in and out of the matrix view.
Drag up/down or left/right to navigate through the matrix. Click an item to toggle. “Allowed” items will be
recalled, “Safed” items will not.
Click a parameter label on top of the table to toggle one parameter for all channels. Click a channel label on
the left to toggle all parameters for one channel. Click All to toggle all items in the current tab or click Block
All or Allow All to affect all items in all tabs.
 Note that multiple Controller instances on the same 4REA4 will always share the 4REA4 engine settings,
including processing and mixing.