User manual

4REA4 Controller Software User Guide

V1.30

8.3 Duration Recall

You can automate the recall of one or more other snapshots when you recall a snapshot. A delay time can

be set for each automatically recalled snapshot within the host snapshot.

Set the Snapshot Number to select the Snapshot you wish to recall. Its name is displayed below the box.

Set the Delay time for the snapshot recall. This is the time the system waits before recalling the Snapshot

after you have recalled the host Snapshot. Time can be set from 0 sec (instant) to 4 minutes. Click Add to

add the Snapshot to the list on the right.

The list shows the recalled Snapshots together with delay times. Select one and click Remove to remove

from the list.

8.4 Update

Update parameters in one or multiple snapshots.

Snapshot List – Click to select the snapshot(s) to be included in the update. Any number and

combination of snapshots can be selected from this list.

A snapshot is stored in this memory location.

This snapshot will be included in the update – click to toggle.

Select Snapshots – Quick options to select All, None or a Range of snapshots.

Scope – Select one of the following options:

Manual – Click to open the Update Scope matrix and manually select which parameters to include in the

update.