User manual

4REA4 Controller Software User Guide

V1.30

8. Snapshots

Use this screen to manage snapshots. Up to 800 snapshots may be stored, and one or more Cue Lists can

be created from the snapshots. Global Safes and per snapshot Recall Scopes can be set to block certain

parameters from recall.

8.1 Snapshot Manager

Gives access to the snapshot list for editing or recalling.

Snapshot list – Choose to display the list of all 800 snapshots or the Current Cue List. The

snapshot highlighted in blue is the currently selected snapshot and is displayed in the bottom left corner of

the snapshot panel. The snapshot highlighted in green is the next snapshot and is displayed in bottom right

corner of the snapshot panel.

Scroll or click and drag up/down and click in the list to select a snapshot. Both the blue and green indicators

will move to confirm the selection. Note that the Next (green) snapshot can be selected independently from

the current snapshot using the Prev and Next buttons found in the snapshot panel.

Icons in the snapshot list indicate the following:

A snapshot is stored in this memory location.

This is the last recalled snapshot, and is also displayed in the Home screen.

Duration is set for this snapshot.

Recall Scopes are set for this snapshot.

The snapshot is locked.

Name Click the Name box to type in a name up to 20 characters long for the currently selected

snapshot. Click the Description box to enter a note about the snapshot.

Recall – Click Fire in either the snapshot manager window or the snapshots panel to recall the Next

(green) snapshot. This overwrites current settings with those stored in the snapshot being recalled. Click

Undo Fire to restore the settings prior to a snapshot recall.

Modify – All these functions affect the currently selected (blue) snapshot.

Click Store in either the snapshot manager or the snapshot panel to store current parameters to the

snapshot. Press the New button in the snapshot panel to store current parameters to the next available

(empty) memory location.

You can update only a selection of parameters to the current snapshot or a range of snapshots. Click

Update to open the Update Snapshot Range window (see below).

Click Delete to clear the name, content and Recall Scope of the snapshot.

Click Recall Scope to view and edit the Recall Scope settings for the snapshot (see below).