User manual

4REA4 Controller Software User Guide
30
V1.30
Back Panel – Use this view to edit the routing for the selected FX. Use the drop-down box to choose
between Unassigned, Insert or Buss->Return.
Buss->Return patches the FX device as a system effect with a Send bus and a dedicated stereo FX
Return channel. Select the bus you want the FX to use and click Apply to confirm. The source patch
defaults to the corresponding FX Send bus if available in the current bus configuration. The output patch
defaults to the dedicated stereo FX Return channel. You can reassign an FX output to a different Input
channel using the Processing / Input Setup screen of such channel.
1
2
1
2