User manual

4REA4 Controller Software User Guide
23
V1.30
2.14 Delay
The delay settings for all the channels or mixes are shown on this page, with the currently selected channel
highlighted. Use the mouse to change its value or click and drag on another parameter box to adjust the
delay for a different channel. Click the In buttons to toggle the delay in or out. Input delays can be adjusted
up to 340ms, Mix delays up to 680ms.
⚙ Click Setup and then click anywhere in the Delay page to access the unit and temperature preferences
for the Delay. The default unit is ms but can be changed to metres, feet, or samples. This can be changed
globally for the Input channels and for the Mix channels. Enter the ambient temperature if using distances so
that 4REA4 can compensate for the effect on delay.