User manual

4REA4 Controller Software User Guide
19
V1.30
2.10 Inserts
You can insert external equipment, external plugins, or one of 16 internal Rack FX units into a channel. Input
channels provide two Insert points (post Gate and post EQ/Comp).
Insert Settings – Click In to switch the inserted device in circuit. Click Unassign to clear the current
Insert assignment.
Insert Patch – Use the drop-down menus to assign the Send and Return to physical sockets, I/O
Ports or FX units. Click and drag the boxes to select socket or number. Click Apply to confirm.
If an internal Rack FX is assigned, the controls for the device are displayed in the Insert screen for
convenience, together with a button to access the FX Presets and a Dry/Wet control to adjust the balance of
direct and effected signal.
1
1
1
2