Getting Started Guide

6 / 18

 PUK

The PUK code (Personal Unlocking Key) is required to change a blocked PIN. It is supplied

with SIM card. If not, contact your network operator. If you input wrong PUK code for 10 times,

SIM card will be invalid. Please contact the network operator to replace the SIM card.

 Barring code

A barring code is required for setting the call barring function. You can obtain this code from

the network operator to set the call barring function.

3.2 Installing T-Flash Card

The T-Flash card is a pluggable mobile storage card inside the mobile phone.

To install the T-Flash card, place its indented side downward, insert the card into the card slot,

till cannot push in.

To remove the T-flash card, slightly take the card out, finish remove.

Note:

1. The mobile phone cannot automatically identify the T-flash card being inserted when the mobile

phone is powered on. You must power off the mobile phone and then power it on, so that the phone

can identify the T-Flash card.

2. The T-Flash card is a miniature object. Keep it out of the reach of children for fear that children

swallow it!

3.3 Charging the Battery

The lithium battery delivered with the mobile phone can be put into use immediately after being

unpacked.

Battery level indication:

 Your mobile phone can monitor and display the battery state.

 Normally the remaining energy of the battery is indicated by the battery level icon at the

upper right corner of the display screen.

 When the battery energy is insufficient, the mobile phone prompts "Battery low". If you have

set an alert tone, an alert tone will be given off when the battery level is too low.

 A charging animation appears when the battery is being charged. When the charging is

complete, the animation disappears.

Using a travel adapter:

 Install the battery into the mobile phone before charging the battery.

 Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure

that the adapter is fully inserted.

 Insert the plug of the travel charger to an appropriate power outlet.

 During the charging, the battery level grids in the battery icon keep flickering till the battery

is fully charged.

 It is normal whenthe battery is become hot during the charging period.

 The battery icon does no longer flicker when the charging process ends.

Note:

Ensure that the plug of the charger, the plug of the earphone, and the plug of the USB cable are

inserted in the right direction. Inserting them in a wrong direction may cause charging failure or