User's Manual

Bluetooth Software Suite User’s Manual
39
Note: The FAX Profile requires a Bluetooth
COM port. By default, the profile is associated
with Bluetooth COM port 7. For more
information, see “Bluetooth COM ports”.
Network
In this section, we will focus on setting up and
establishing Bluetooth networks. We will assume
that you have some previous experience in
ordinary, i.e. wired networks using Microsoft
networking. If that is not the case, please refer
to the Microsoft Windows online help for
information on Microsoft networking.
Setting up networks
During the installation of the Bluetooth Software
Suite, the installation program assigned a static IP
address to the TCP/IP protocol bound to the
Bluetooth Ethernet adapter.
The settings made during the installation will be
used when you establish a network link as
described in the section "Network link
establishment". You can, of course, change these
settings as you like.
The Bluetooth network works in the same way as
if the computers were connected through a hub
using a wired Ethernet. The settings made in
Windows are used, exactly as if using Microsoft
networking.