Installation Guide

2
About this guide
This Installation Guide will show you
how to install the Bluetooth™
Software Suite version 1.0. The
instructions will cover:
• Inserting the PC card and
installing the drivers, i.e. software
programs needed for the PC card
to work.
• Installing the application software.
Furthermore, users who have a
previous version of the Bluetooth
Software Suite will find information on
how to uninstall the old version before
installing the new one.
In addition to this printed Installation
Guide, the Bluetooth Software Suite is
accompanied by the following
documents: A Beginner’s Guide
providing a general introduction to the
Bluetooth technology, and a User’s
Manual covering all aspects of
operating the Bluetooth Software
Suite. You will find the Beginner’s
Guide and the User’s Manual on the
Bluetooth Software Suite CD-ROM.
Disclaimer
Any responsibility or liability for loss or
damage in connection with the use of
this product and the accompanying
documentation is disclaimed. The
information in this document is
furnished for informational use only, is
subject to change without notice, may
contain errors or inaccuracies, and
represents no commitment
whatsoever. This agreement is
governed by the laws of Denmark.
Document issue: Draft 00-04-19
System
Requirements
The Bluetooth Software Suite can be
installed on computers running one of
the following operating systems:
• Microsoft Windows 95 or later
• Microsoft Windows NT
Workstation version 4.0 or later
Inserting PC card
When you want to install the
Bluetooth Software Suite on your
computer, the first thing to do is insert
the PC card in the PCMCIA slot of the
computer.
1. Turn on your computer.
2. Make sure all programs are
closed.
3. Insert the PC card in the
PCMCIA slot (placed on one of
the sides of the laptop computer):