User's Manual
Table Of Contents
- Introduction
- Attaching the Module to Your Phone
- Introducing Devices to Each Other
- Linking with a PC or Data Device
- Linking with a Bluetooth Headset
- Ending a Bluetooth Connection
- Customization Features
- Troubleshooting
- Glossary
- Limited Warranty for Motorola Personal Communications Products and Accessories Purchased in the U...
35
Troubleshooting
I tried to establish a
bond between the
phone and another
device, but my phone
displays Bluetooth Bond
Failed: List Full
.
Delete one or more items from your device list.
(Refer to “Deleting a Device in Your Device List” on
page 33.) Try the connection again from the
beginning.
Note: If you want to reuse the deleted device at a
later time, you must bond again with that device.
The phone displays
Invalid: Bluetooth
Passkey
.
Make sure you enter the same passkey on both
devices. If one device has a fixed passkey, that
passkey must be entered on the other device.
If you enter an incorrect passkey, you need to start
the bond again. Turn all Bluetooth devices off and
then on again, and verify that they are in bondable
mode.
When prompted to enter the passkey, do so
immediately.
When I scan for
handsfree devices, the
phone displays
No links
found
.
Verify that the headset is discoverable and
connectable.
Verify that the devices are within 10 meters of each
other.
Problem Resolution