User Manual

2 MC13192 Product Preview MOTOROLA

Features

• Wireless toys

The transceiver includes a low noise amplifier, 1.0 mW PA, VCO, full spread-spectrum encoding and

decoding. The device supports 250 kbps O-QPSK data in 5.0 MHz channels, per the IEEE 802.15.4

specification. A Serial Peripheral Interface (SPI) is used for RX and TX data transfer and control.

1 Features

• Recommended power supply range: 2.0 to 3.4 V

• 16 Channels

• 0 dBm (Typical), up to 3.6 dBm maximum output power

• Buffered Transmit and Receive Data Packets for Simplified Use with Low Cost Microcontrollers

• Supports 250 kbps O-QPSK Data in 5.0 MHz Channels and Full Spread-Spectrum Encode and

Decode (Compatible with IEEE Standard 802.15.4)

• Three Power Down Modes for Power Conservation:

— < 1 µA Off Current

— 3.0 µA Typical Hibernate Current

— 40 µA Typical Doze Current

• RX sensitivity of -92 dBm (Typical) at 1.0% Packet Error Rate

• Four internal timer comparators are available to reduce MCU resource requirements

• Clock output is available for use by MCU

• Seven General Purpose Input/Output ports (GPIO) are available

• Operating Temperature Range: -40°C to 85°C

• Small form factor QFN-32 Package

— Meets Moisture Sensitivity Level (MSL) 3

— 260°C Peak Reflow temperature

— Meets lead-free requirements

eescale S

emiconduct

, I

Freescale Semiconductor, Inc.

nc...