User Manual

ManualsBrandsDigianswer ManualsElectronicsWPAN Transceiver

MC13192

Ordering Information

Device Device Marking Package

MC13192 13192 QFN-32

Package Information

Plastic Package

Case 1311-03

(QFN-32)

(Scale 1:1)

This document contains information on a product under development.

Motorola reserves the right to change or discontinue this product without notice. © Motorola,Inc.,2004.All rights

The MC13192 is a short range, low power, 2.4 GHz ISM band transceiver which contains a

complete 802.15.4 physical layer (PHY) modem designed for the IEEE 802.15.4 wireless

standard supporting star and mesh networking.

When combined with an appropriate microcontroller (MCU), the MC13192 provides a cost

effective solution for short-range data links and networks. Interface with the MCU is

accomplished utilizing a four wire serial peripheral interface (SPI) connection which allows

for the use of a variety of processors. The software and processor can be scaled to fit

applications ranging from simple point-to-point systems, through complete ZigBee™

networking.

For more detailed information on MC13192 operation, refer to the MC13192 Reference

Manual, part number MC13192RM/D.

Applications include, but are not limited to, the following:

• Remote control and wire replacement in industrial systems such as wireless sensor

networks

• Factory automation and motor control

• Heating and cooling

• Inventory management and RF ID tagging

Potential consumer applications include:

• Home automation and control

• Human interface devices

• Remote entertainment control

Product Preview

MC13192/D

Rev. 2.4, 06/2004

2.4 GHz, Low Power

Transceiver for 802.15.4

Contents

1 Features . . . . . . . . . . . . . 2

2 Block Diagrams . . . . . . . 3

3 Data Transfer Modes . . 3

4Electrical

Characteristics . . . . . . . 5

5Functional

Description . . . . . . . . . . 8

6 Contact

Connections . . . . . . . . 11

7 Applications

Information . . . . . . . . . . 15

8 Packaging

Information . . . . . . . . . . 18

eescale S

emiconduct

, I

Freescale Semiconductor, Inc.

nc...

Summary of content (20 pages)

PAGE 1
Freescale Semiconductor, Inc. Product Preview MC13192/D Rev. 2.4, 06/2004 MC13192 2.4 GHz, Low Power Transceiver for 802.15.4 (Scale 1:1) Freescale Semiconductor, Inc... Package Information Plastic Package Case 1311-03 (QFN-32) Ordering Information Contents 1 2 3 4 5 6 7 8 Features . . . . . . . . . . . . . 2 Block Diagrams . . . . . . . 3 Data Transfer Modes . . 3 Electrical Characteristics . . . . . . . 5 Functional Description . . . . . . . . . . 8 Contact Connections . . . . . . . .
PAGE 2
Features • Freescale Semiconductor, Inc. Wireless toys The transceiver includes a low noise amplifier, 1.0 mW PA, VCO, full spread-spectrum encoding and decoding. The device supports 250 kbps O-QPSK data in 5.0 MHz channels, per the IEEE 802.15.4 specification. A Serial Peripheral Interface (SPI) is used for RX and TX data transfer and control. Freescale Semiconductor, Inc... 1 Features • Recommended power supply range: 2.0 to 3.4 V • 16 Channels • 0 dBm (Typical), up to 3.
PAGE 3
Freescale Semiconductor, Inc. Block Diagrams 2 Block Diagrams Figure 1 shows a simplified block diagram of the MC13192. The MC13192 is an IEEE 802.15.4 transceiver that provides most of the functions required in the Physical Layer (PHY) specification. Figure 2 shows the basic system block diagram for the MC13192 in an application. Interface with the IC is accomplished through a 4-wire Serial Peripheral Interface (SPI).
PAGE 4
Freescale Semiconductor, Inc. Data Transfer Modes In streaming mode, the data is fed to the MC13192 on a word by word basis with an interrupt serving as a notification that the MC13192 is ready for more data. This continues until the whole packet is transmitted.
PAGE 5
Freescale Semiconductor, Inc. Electrical Characteristics 4 bytes 1 byte Preamble Start of Frame Delimiter 1 byte 125 bytes Max Frame Length 2 bytes Payload FCS Figure 3. MC13192 Packet Structure 4 Electrical Characteristics Freescale Semiconductor, Inc... 4.1 Maximum Ratings Table 1. Maximum Ratings Rating Symbol Value Unit Power Supply Voltage VBATT, VDDINT 3.
PAGE 6
Electrical Characteristics Freescale Semiconductor, Inc. Table 2. Recommended Operating Conditions (Continued) Characteristic Symbol Min Typ Max Unit Pmax - -20 0 dBm RF Input Power Crystal Reference Oscillator Frequency (±40 ppm over everything to meet the 802.15.4 standard.) 16 MHz Only fref 4.3 DC Electrical Characteristics Table 3. DC Electrical Characteristics (VCC = 2.7 V, TA = 25°C, unless otherwise noted) Freescale Semiconductor, Inc...
PAGE 7
Freescale Semiconductor, Inc. Electrical Characteristics 4.4 AC Electrical Characteristics Table 4. Receiver AC Electrical Characteristics Freescale Semiconductor, Inc...
PAGE 8
Functional Description Freescale Semiconductor, Inc. 5 Functional Description 5.1 MC13192 Operational States The MC13192 has a number of operational states that allow for low-current operation. Entry from the Off to Idle state occurs when RST is de-asserted. Once in Idle, the SPI is active and controls the IC. Transition to Off, Hibernate, and Doze is controlled through the SPI. These states are summarized, along with the transition times, in Table 6.
PAGE 9
Freescale Semiconductor, Inc. Functional Description 5.2 Serial Peripheral Interface (SPI) Control of the MC13192 and data transfers are accomplished by means of a 4-wire Serial Peripheral Interface (SPI). This section details the operation of the SPI. 5.2.1 General Freescale Semiconductor, Inc... The MC13192 operates as a slave device only.
PAGE 10
Functional Description Freescale Semiconductor, Inc. Table 7. SPI Parametric Timing Specifications Freescale Semiconductor, Inc... Symbol Parameter Min Typ Max Unit 8.0 MHz 1/tPER SPICLK frequency tCLKH Pulse Width, SPICLK high 0.5 * tPER µs tCLKL Pulse Width, SPICLK low 0.5 * tPER µs tCE_SU Setup Time, CE low to rising SPICLK 0.5 * tPER µs tCE_H Hold Time, rising SPICLK to CE high tSU Setup Time, MOSI to rising SPICLK 0.5 * tPER µs tH Hold Time, MOSI to rising SPICLK 0.
PAGE 11
Freescale Semiconductor, Inc. Contact Connections 6 Contact Connections Table 8. Contact Function Description Freescale Semiconductor, Inc... Contact # Contact Name Type Description Functionality 1 RFIN- RF Input LNA negative differential input 2.4 to 2.5 GHz 2 RFIN+ RF Input LNA positive differential input 2.4 to 2.5 GHz 3 Not Used Tie to Ground 4 Not Used Tie to Ground 5 PAO+ RF Output /DC Input Power Amplifier Positive Output. Open drain. Connect to VDDA. 2.4 to 2.
PAGE 12
Contact Connections Freescale Semiconductor, Inc. Table 8. Contact Function Description (Continued) Freescale Semiconductor, Inc... Contact # 12 Contact Name Type Description Functionality 11 GPIO1 Digital Input/ Output General Purpose Input/Output1. When gpio_lt_en, Register 9, Bit 7, = 1, GPIO1 functions as an “Out of Idle” indicator. When digital output: Vol= 20%VDDINT Voh=80%VDDINT When digital input: Vil= 30%VDDINT Vih=70%VDDINT 1 mA max source/ sink.
PAGE 13
Freescale Semiconductor, Inc. Contact Connections Table 8. Contact Function Description (Continued) Freescale Semiconductor, Inc... Contact # Contact Name Type Description Functionality 21 VDDD Bypass Digital supply bypass Decouple 0.1 to 0.47 µF to ground. 22 VDDINT Input Digital interface supply & digital regulator input – Connect to Battery 2.0 to 3.4 V Decouple 0.47 to 1 µF to ground.
PAGE 14
Contact Connections Freescale Semiconductor, Inc. Table 8.
PAGE 15
Freescale Semiconductor, Inc. Applications Information 7 Applications Information Figure 7 shows a basic application schematic for interfacing the MC13192 with an MCU. Table 9 lists the Bill of Materials. Freescale Semiconductor, Inc... The MC13192 has differential RF inputs and outputs. These are well suited to balanced PCB antenna structures. Alternatively, chip antennas or other single-ended structures can be used with commercially available chip baluns or microstrip equivalents.
PAGE 16
VDDA C8 100 pF GPIO4 11 12 GPIO3 MC13192 Product Preview 15 RESET 14 ATTN 13 RXTXEN 10 16 MOSI MISO CE IRQ VDDD VDDINT GPIO5 GPIO6 25 C7 100 pF 26 CLKO 9 27 XTAL1 C9 100 pF 8 VDDA Not Used PAO- 28 U1 MC13192 VDDVCO PAO+ 29 VDDLO1 7 GPIO2 Not Used 30 VDDLO2 6 VBATT Not Used RFIN+ RFIN- 31 XTAL2 5 4 3 2 1 32 C2 9.0 pF Y1 16.00 MHz GPIO7 Microstip Harmonic Traps Tx Antenna Rx Antenna L1 R1 6.8 nH 200 Ω C10 100 pF C3 C5 C6 0.
PAGE 17
Freescale Semiconductor, Inc. Applications Information Freescale Semiconductor, Inc... Table 9. MC13192 to MCU Bill of Materials (BOM) MOTOROLA Item Number Label/Value Attributes Designation 1 9 pF SMD0201 C1 2 9 pF SMD0201 C2 3 0.1 uF SMD0201 C3 4 0.1 uF SMD0201 C4 5 100 pF SMD0201 C5 6 100 pF SMD0201 C6 7 100 pF SMD0201 C7 8 100 pF SMD0201 C8 9 100 pF SMD0201 C9 10 100 pF SMD0201 C10 11 1.0 uF SMD0201 C11 12 6.
PAGE 18
Freescale Semiconductor, Inc. Packaging Information 8 Packaging Information PIN 1 INDEX AREA 0.1 5 A C 2X M C 0.1 0.1 2X C G 1.0 0.8 1.00 0.75 0.05 C 5 5 (0.25) 0.05 0.00 (0.5) C SEATING PLANE DETAIL G VIEW ROTATED 90° CLOCKWISE M Freescale Semiconductor, Inc... B C 0.1 A DETAIL M PIN 1 INDEX 3.25 2.95 EXPOSED DIE ATTACH PAD 25 NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS. 2. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 3.
PAGE 19
Freescale Semiconductor, Inc. Freescale Semiconductor, Inc...
PAGE 20
Freescale Semiconductor, Inc... Freescale Semiconductor, Inc. HOW TO REACH US: Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to USA/EUROPE/LOCATIONS NOT LISTED: design or fabricate any integrated circuits or integrated circuits based on the information in this Motorola Literature Distribution; P.O.